42-2507

32-1005 - Slave Saver for Bus transmissions using a CNC slave. The bracket is machined from a billet piece of 6061 T6 aluminum and is fully polished. The slave heim has a 5/16 hole for use with a CNC slave. If you are using an Empi, Jamar, or Latest Rage slave, refer to part number 32-1015.

32-1012 - Slave Saver for Type 1 transmissions using a CNC slave and aftermarket side covers (This can be used with stock side covers but a bump on the cover will have to be ground down, or the bracket can be shimmed out with washers). The bracket is machined from a billet piece of 6061 T6 aluminum and is fully polished. The slave heim has a 5/16 hole for use with a CNC slave. If you are using an Empi, Jamar, or Latest Rage slave, refer to part number 32-1016.

32-1015 - Slave Saver for Bus transmissions using an Empi, Jamar, or Latest Rage slave. The bracket is machined from a billet piece of 6061 T6 aluminum and is fully polished. The slave heim has a 3/8 hole for use with an Empi, Jamar, or Latest Rage slave. If you are using a CNC slave, refer to part number 32-1005.

32-1016 - Slave Saver for Type 1 transmissions using an Empi, Jamar, or Latest Rage slave and aftermarket side covers (This can be used with stock side covers but a bump on the cover will have to be ground down, or the bracket can be shimmed out with washers). The bracket is machined from a billet piece of 6061 T6 aluminum and is fully polished. The slave heim has a 3/8 hole for use with an Empi, Jamar, or Latest Rage slave. If you are using a CNC slave, refer to part number 32-1012.

42-2506

42-2504C - Spun Aluminum Gas Tanks For Buggies And Sandrails. This tank measures 10" x 30" and is available in an end fill as well. This tank also has a 1/4" npt female fitting on bottom of tank. Cap and brackets included.

42-2504 - Spun Aluminum Gas Tanks For Buggies And Sandrails. This tank measures 10" x 30" and is available in a center fill as well. This tank also has a 1/4" npt female fitting on bottom of tank. Cap and brackets included.

42-2505C - Spun Aluminum Gas Tanks For Buggies And Sandrails. This tank measures 10" x 33" and is available in an end fill as well. This tank also has 1/4 npt female fitting on bottom. Cap and brackets included.

42-2505 - Spun Aluminum Gas Tanks For Buggies And Sandrails. This tank measures 10" x 33" and is available in a center fill as well. This tank also has 1/4 npt female fitting on bottom. Cap and brackets included.

42-2509 - Spun Aluminum Gas Tanks For Buggies And Sandrails. This tank measures 10" x 40" and is only available in an end fill. This tank also has a 1/4" npt female fitting on bottom of tank. Cap and brackets included.

42-2500 - Spun Aluminum Gas Tanks For Buggies And Sandrails. THis tank measures 8" x 16" and is only available as a center fill tank. This tank also has a 1/4" npt female fitting on bottom of tank. Cap and brackets included.