SACO .:. Quality Off Road Products








 

 
 
 
 

Home » Rack and Pinion

 Checkout

64-1011 A-Arm Center Load Rack 1 to 1 Ratio
64-1011 A-Arm Center Load Rack 1 to 1 Ratio

Details 

64-1011 - A-Arm Rack and Pinion- This rack is the same dimensions as the 64-1000 Rack and Pinion. Can be used on front steer or rear steer, A-arm or trailing arm cars. Rack gear is made of 4130 Chromoly. Housing is hard anodized. 1/2" Heims are spaced 2.320" apart and this rack uses a 3/4" 48-spline pinion gear. This rack is identical to the 64-1002 except for the steering ratio. Steering Ratio: 1-1 (Recommended for Short Course Only)
Price: $335.95

64-1021 Light Duty Rack, Polished 1.5 to 1 Ratio
64-1021 Light Duty Rack, Polished 1.5 to 1 Ratio

Details 

64-1021 - Polished Buggy Rack-- This rack is recommended only for light weight sand cars with minimal travel that weigh no more than 1100 pounds. Rack is made with chromoly rack double heat treated gears. Uses a 1/2" hole 1.800" apart for the tie rod connections. Housing is fully polished and this rack has a 3/4" 48-Spline pinion gear.
Price: $269.95

64-1022 Light Duty End Load A-Arm Rack, Polished with Heims 1.5 to 1 Ratio
64-1022 Light Duty End Load A-Arm Rack, Polished with Heims 1.5 to 1 Ratio

Details 

Front Steer A-Arm Rack & Pinion--These racks are recommended for the front steer A-arm light weight sand cars with minimal travel. The housings are fully polished along with the top plate tie rod eyelets are 16" apart. This rack has a 3/4" 48-Spline pinion gear. Comes with heims. Rack with clevis ends are available (refer to part # 64-1022SU)
Price: $285.95

64-1022SU Light Duty End Load A-Arm Rack, Polished with Clevis' 1.5 to 1 Ratio
64-1022SU Light Duty End Load A-Arm Rack, Polished with Clevis' 1.5 to 1 Ratio

Details 

Front Steer A-Arm Rack & Pinion--These racks are recommended for the front steer A-arm light weight sand cars with minimal travel. The housings are fully polished along with the top plate tie rod eyelets are 16" apart. This rack has a 3/4" 48-Spline pinion gear. Comes with clevis ends. Rack with heim ends are available (refer to part # 64-1022)
Price: $310.00

64-1025 A-Arm Heavy Duty Enclosed Rack, Polished 1.5 to 1 Ratio
64-1025 A-Arm Heavy Duty Enclosed Rack, Polished 1.5 to 1 Ratio

Details 

64-1025 - This rack and pinion is designed for A-arm front steer medium sized vehicles. It has a 1 1/4" rack gear with a 1 1/4" pinion and has a 1 1/2 to 1 ratio. It is fully polished and requires 1/2" heim thru hole. This rack is fully enclosed and machined from 6061 T6 aluminum. This rack, just like all of our other racks, is proudly made here in Santa Fe Springs, CA. (Distance between tie rod heims is 11 inch spread on the bar) This rack has a 3/4" 48-Spline pinion gear.
Price: $345.95

64-1500 International MAGNUM RACK 1.5 to 1 Ratio
64-1500 International MAGNUM RACK 1.5 to 1 Ratio

Details 

64-1500 - MAGNUM the best and strongest rack available today. Rack is a full 1 1/2" wide. Rack stops are included and this rack is set up for off road vehicles using international tie rod ends. (1 1/2 to 1 ratio) This rack has a 3/4" 48-Spline pinion gear.
Price: $399.99

64-1500-5/8 MAGNUM RACK 1.5 to 1 Ratio
64-1500-5/8 MAGNUM RACK 1.5 to 1 Ratio

Details 

64-1500-5/8 - MAGNUM the best and strongest rack available today. Rack is a full 1 1/2" wide. Rack stops are included and this rack set up for off road vehicles using 5/8 tie rod ends. (1 1/2 to 1 ratio) This rack has a 3/4" 48-Spline pinion gear.
Price: $399.95

64-1500T MAGNUM Tatum Rack 1.5 to 1 Ratio
64-1500T MAGNUM Tatum Rack 1.5 to 1 Ratio

Details 

64-1500T - MAGNUM VERSION of the Front steer A-Arm Rack--The logical choice for all off road racing. A proven unit, made with chromoly, rack are double heat treated gears. Housings are hard anodized for wear. Made for 1/2" heims and uses a 3/4" 48-spline pinion gear. Eyelets for tie rods 5" apart.
Price: $399.95

64-1505 International MAGNUM RACK 1 to 1 Ratio
64-1505 International MAGNUM RACK 1 to 1 Ratio

Details 

64-1505 - MAGNUM the best and strongest rack available today. Rack is a full 1 1/2" wide. Rack stops included and is set up for international tie rod ends. (1 to 1 ratio)(Recommended for Short Course Only) This rack has a 3/4" 48-Spline pinion gear.
Price: $399.95

64-1505-5/8 MAGNUM RACK 1 to 1 Ratio
64-1505-5/8 MAGNUM RACK 1 to 1 Ratio

Details 

64-1505-5/8 - MAGNUM the best and strongest rack available today. Rack is a full 1 1/2" wide. Rack stops are included and this rack set up for off road vehicles using 5/8 tie rod ends. This rack has a 3/4" 48-Spline pinion gear. (1 to 1 ratio)(Recommended for Short Course Only) This rack has a 3/4" 48-Spline pinion gear.
Price: $399.95

64-1512 MAGNUM A-Arm Center Load Rack 1.5 to 1 Ratio
64-1512 MAGNUM A-Arm Center Load Rack 1.5 to 1 Ratio

Details 

64-1512 - Same as MAGNUM only designed for A-arm front steer cars. Tie rod connection using 1/2 bolt for 1/2 heim comes with mount. Overall length 17". 4 1/2 travel. (1 1/2 to 1 ratio)
Price: $425.95

64-1522SU Heavy Duty End Load A-Arm Rack with Clevis' 1.5 to 1 Ratio
64-1522SU Heavy Duty End Load A-Arm Rack with Clevis' 1.5 to 1 Ratio

Details 

Magnum Front Steer A-Arm Rack & Pinion--These racks are just like our front steer A-arm racks for light weight sand cars with minimal travel, but are built to take the abuse of heavier vehicles looking to use the same set-up. The housings are black anodized for wear and the tie rod eyelets are 16" apart. The rack gear is also wider than the 64-1022SU, making it strong enough to handle the heavier weight. Comes with clevis ends. This rack has a 3/4" 48-Spline pinion gear.
Price: $395.00

« Previous | 1 | 2 | 3 | 4 | 5 | Next »



 
  

Copyright SACO Performance 2007 - All Rights Reserved links